Payment & Shipping Terms:
|Max Intermittent Pulling Force:||180kN||Max Continuous Pulling Force:||150 KN|
|Speed At Max Pull:||2.5 Km/h||Max Speed:||5 Km/h|
|Pull At Max Speed:||75 KN||Overall Dimension (length×width×height):||4800×2350×2550 Mm|
CUMMINS hydraulic Transmission Line Stringing Equipment,
180kN Transmission Line Stringing Hydraulic Puller,
Transmission Line Stringing Equipment 2.5 km/h
Transmission Line Stringing Equipment Hydraulic Puller Max Intermittent Pulling Force 180kN
Purposes and characteristic
The machine is a kind of high efficiency electric construction machinery, with good entire performance, high configuration of main functional components, large power reserve, quick pulling speed and wide application. The machine is mainly matched with small efficiency tensioner, is used for the stringing of pulling ropes and also pulls conductor under meeting pulling force. It can satisfy the stringing of double-bundle LGJ-720 and below conductor in mountainous area and foothills, four-bundle LGJ-630 and below conductor in flatlands, OPGW or ADSS optical cable in various terrains, and 500KV and below wire pulling ropes in various terrains.
Main technical performance parameter
Closed type circuit hydraulic drive system adjusts speed through hydraulic plunger pump with bi-directional variable displacement, reduces speed through planet gear and drives pulling wheels to rotate in positive and negative directions through the first level gear terminal drive.
Cooling mode forced cooling
Auxiliary oilway hydraulic system
Open type constant displacement throttle speed governing hydraulic system is supplied oil by gear pump and controls oil liquor’s cooling and hoisting tail bracket’s lifting of the whole hydraulic system through hand operated direction valve and ball valve.
System working pressure 12Mpa
Table for oil and capacity
|Oil-filling site||Oil brand||Capacity||oil level observing|
Winter: －10＃or －35＃light diesel oil
Summer: 0＃or 10 ＃ light diesel oil
Oil level gage
(figure 5 )
|Hydraulic oil tank||Great Wall 46# hydraulic oil||200 L||Oil level indicator (see drawing 1)|
|Engine oil sump||CUMMINS special CD grade||18.5 L||Oil rule|
|Grease lubrication site||No.2 lubricating grease (GB7323—89)||Filling up||(given as drawing 1)|
Before using, maintaining and repairing the machine, please carefully read and fully understand the operating instructions, and strictly abide by relevant safety precautions and warnings; Good maintenance and correct use and operation can reduce faults and prolong the service life of the machine.
Contact Person: Mr. Green Lu
Tel: +86 18036062799