Payment & Shipping Terms:
|Transmission Line Stringing Equipment Hydraulic Puller
|Max Continuous Pull:
|Speed At Max Pull:
|Pull At Max Speed:
TY90 Transmission Line Stringing Equipment,
Transmission Line Stringing Equipment 90kN,
Hydraulic Puller Transmission Line Stringing Equipment
Transmission Line Stringing Equipment TY90 90kN Hydraulic Puller
How is stringing transmission line carried out?
The stringing shall be done as per approved stringing charts. The earth wire shall be strung and securely clamped to the towers before the conductors are drawn up in the order of the top conductors first, then the conductor on the opposite side and in the end the lower conductor at the same side.
TY90 Hydraulic Puller
This machine allows for the tension stringing of twin-bundle conductor of 500mm2 and below in mountainous and hilly areas, of twin-bundle conductor of 630mm2 and below in flat lands, and of single conductor 720mm2 in various terrains; besides, it can be used for traction stringing of OPGW or ADSS optical cable and 220kV haulage rope in various terrains.
Bull-wheel diameter: 540mm
Groove number: 8
Max rope diameter : 21mm
Max diameter of rope reel: 1400mm
Total weight: 4350kg
Overall dimension (length*width*height): 4500×2100×2450mm
Max pull: 100kN Max continuous pull: 90kN
Speed at max pull: 2.5km/h Max speed: 5km/h
Pull at max speed: 40kN
Diesel 118kw(158hp) Euro II, 4-stroke cycle, turbo-charged
Cooling system liquid, Electrical system 24V
hydraulic pump: German Rexroth
Main motor: German Rexroth
speed reducer: German Rexroth
Tail bracket hoisting motor: American Eton
Hydraulic meter: German
Operating handle: German Rexroth
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Hydraulic dynamometer with set-point and automatic control of maximum pull
Hydraulic oil cooling system
Control instruments for hydraulic system and diesel engine
On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1400
Hydraulic front stabilizer
Grounding connection point
Lighting system for the trailer
Hydraulic rope clamp for reel change
Swivel guide rope roller
Trailer for towing at max speed of 30 km/h
Digital speed and meter counter (extra charge)
The chassis provided with Brake, back lights and mudguard, with a single point lift to allow lifting with a crane.
Cable and radio remote control fully replacing all controls at machine panel.
Remote diagnosis via GSM network with GPS modem, Synchronization system
Hydraulic system for drum stand control with flat face quick action couplings
Auxiliary Hydraulic system (700/1000 bar) for power pressing tool
Lockable toolbox, Holding fixture for hose kit, Grounding plate, Acoustic insulation
Biodegradable hydraulic oil, Allowable tension indictor, Overload tension alarm, First Aid Kit
Manufacturer's workshop maintenance manual, in English
Manufacturer's recommended tools.
Manufacturer's routine spares for five years' duty (filters, bulbs, etc.).
Contact Person: Mr. Green Lu
Tel: +86 18036062799