130kn Hydraulic Cable Tensioner Overhead Stringing Construction Cummins Engine

​TY1x120III Hydraulic Tensioner

• This machine is a small and efficient electric construction machine with high overall performance parts configuration, large power reserve, fast pay-off speed, and wide range of uses.
• Mainly used for spreading various wires, optical cables and traction ropes.
• It can meet the tension of 220KV double-split LGJ-630 and below conductors in mountainous and hilly terrain; the tension of optical cables such as OPGW or AESS in various terrains; the tension of 500KV traction rope under various terrains and the reverse pulling.

• Maximum intermittent tension: 130KN
• Maximum continuous tension: 120KN
• Corresponding speed: 2.5km/h
• Maximum payoff speed: 5km/h
• Corresponding tension: 60KN
• Maximum back pulling force: 90kn

• Maximum back pulling speed: 3km/h
• Diameter of tensile force wheel: 1500mm
• Groove numbers: 15
• Maximum applicable diameter of wire: 40mm
• Transport dimensions: 5300*2300*2600mm
• Total weight: 8100kg

• Model: Cummins 4BTA3.9-C130
• Rated power: 97kw/2500rpm

• System voltage: 24V
• Storage battery: 6-QA-110(2 sets)
• Diesel engine starting: 24V electric starting

• With closed double-loop hydraulic transmission system and planet decelerator, tension wheel is driven by primary gear.
• With inversion, the magnitude of reverse traction force is led by exit pressure of pump.
• In tension condition, hydraulic motor rotation is driven by the tension wheel; the magnitude of tension is controlled by regulating the motor exit pressure.

• Type: Hydraulic control bidirectional variable plunger pump(Germany Rexroth )
• Model: A4VG71EP4/32R

• Type: planet Gear Decelerator (Italy Bonfiglioli)
• Model: 310 L2
• Reduction ratio: 28
• Brake opening pressure: 1.8MPA

• Type: Two-way Quantitative Plunger Piston Motor (Germany Rexroth)
• Model: A2FM180/61W