The hydraulic unit has an automatic retraction function that returns the piston to its starting position when the maximum working pressure is reached.
Manual retraction allows the user to return the piston to the starting position if the crimp is incorrect. When the trigger is released, the device is equipped with a special brake when the forward movement of the piston and the mold is stopped.
The unit is equipped with a dual piston pump featuring a quick approach of the mold and a slow crimping movement.
The press fitting can be rotated 360° smoothly about the longitudinal axis for better access to narrow corners and other difficult working areas.
Lithium-ion batteries have neither memory effects nor self-discharge. The tool is ready to run even after a long period of non-operation. In addition, compared to NiMH batteries, we see a lower power-to-weight ratio, a 50% increase in capacity, and a shorter charging cycle.
The temperature sensor automatically stops the tool when the temperature exceeds 60 °C for a long time, and the fault signal sounds, indicating that the tool cannot continue to work until the temperature drops to normal.
Head rotation 360°
OLED display (clamping time, pressure, voltage)
Emergency pressure release button
All tools can be controlled by a trigger
One-handed ergonomic design
Microcomputer Control System - Automatic Pressure Detection
Lithium-ion battery has a lower weight ratio, a 50% increase in capacity, and a shorter charge cycle